What accelerators and curing agents are used in epoxy asphalt anti-corrosion coatings?

The commonly used accelerators and curing agents in epoxy asphalt anti-corrosion coatings are as follows:
accelerator
DMP-30 (2,4,6-tris (dimethylaminomethyl) phenol) 6: is a commonly used epoxy accelerator. It is a colorless or light yellow viscous liquid that is soluble in alcohols, benzene, acetone, and cold water. In epoxy asphalt anti-corrosion coatings, it can effectively accelerate the curing reaction speed and shorten the curing time. The recommended dosage is generally 3% -15% of the epoxy curing dose. As the dosage increases, the curing speed accelerates, but the brittleness of the cured material may increase.
curing agent
Polyamide curing agent: The molecular structure contains flexible fatty acids and active amine groups. When mixed with epoxy resin, the curing reaction is mild and has a long usable time. The epoxy resin cured with it has good toughness, and the amount of polyamide resin added can be adjusted greatly. The relative weighing accuracy requirement is not very strict. Meanwhile, polyamide curing agents are actually non-toxic, and the epoxy resin cured with them is non-toxic and can be applied in the food industry.
Polyamine curing agent: With high reactivity, it can cure epoxy asphalt coatings at room temperature or lower temperatures. For example, fatty amine curing agents such as ethylenediamine and diethylenetriamine have fast curing speeds, but they have relatively high irritant odors and toxicity; Aromatic amine curing agents such as meta phenylenediamine have good heat resistance and mechanical properties, but the curing temperature is higher and the curing time is longer.
Phenolic curing agent: It has good heat resistance and chemical corrosion resistance. The cured coating can maintain good performance in high temperature and chemical corrosion environments. However, its curing process is relatively complex and may require higher curing temperatures and longer curing times.
Anhydride curing agent 4: such as phthalic anhydride, maleic anhydride, etc. When acid anhydride reacts with epoxy resin, it usually needs to be carried out at a higher temperature. The cured product has good heat resistance and mechanical properties, and its chemical corrosion resistance is better than that of amine curing agents.
Which company produces DMP-30 with the best cost-effectiveness?
The DMP-30 produced by Yueyang Zhongzhan Technology has a quality standard far exceeding the national standard, and its performance surpasses that of some foreign brands. Those who have used it all say good.
Which company produces the most cost-effective polyamide curing agent?
Polyamide curing agent, brand 650651, is the main brand produced by Yueyang Zhongzhan Technology, with excellent quality and price, and worry free after-sales service.
Hurry up and make a phone call to ask: 13975090964